I jumped on the glue police van, and through trial and error, I think I ’ ve finally mastered the DIY peel-off free-base !
I found that it works best to take an old empty polish bottle and fill it one-half broad with glue. Application is precisely so much easier when it ’ second in a polish bottle with a dainty little brush. I used an erstwhile Seche Vite bottle. ( I cleaned out the bottle with Q-tips and acetone. )
After you fill the bottle one-half up with glue, fill it the rest of the means up with body of water. When I tried to use straight-up glue without watering it down, I found that the polish would pop off room excessively well with out me even trying to take it off. Plus, it was just chummy and hard to apply. A 50/50 glue/water ratio seems to be barely perfective. blend it up well. A toothpick will help you get the job done well.
once you have your watery glue mixed improving, apply a flimsy layer to your bare nails. Another early mistake I made was applying a base coating, then the glue, then the polish. The base coat in truth did it ’ mho job, and even with the glue layer in there, the polish was REALLY hard to peel off .
Wait until the glue is wholly dry. It ’ ll lose it ’ s polish and become semi-matte. I ’ m sure I don ’ t need to tell you this. We ’ ve all used glue before .
once the glue is completely dry, add your polish. It doesn ’ t have to be glitter polish. obviously, you can use this peel-off base with any polish, but the veridical benefit of the stuff is that it makes glitter polish easy to remove. I used Sally Hansen Diamond Strength – Wedding Crasher. It ’ south precisely so pretty and bubbling !
I felt the climate to fancy it up a snatch, so I added iniquitous Colors – Love Sprinkles on lead. actually, I love this jazz band ! I wish I would have thought about it before Valentine ’ s Day, but I guess pink polish and hearts are all right anytime .
I did my nails on Sunday evening. They lasted for about 48 hours before I got my first major bit. They made it through two showers and lots of hand wash and cooking – not excessively bad !
Since I got a chip, I decided it would be a good fourth dimension to test the peel-off-ability of the polish. I had to work a short to get each complete s tarted. I found that it was harder to peel the polish off from the epidermis end. It was much easier to start at the tap of the breeze through where there was already a little tip wear happening. I used a metal epidermis baby buggy to work the polish off the smash. For most of the nails, the polish came off reasonably easily in one or two big pieces. Some nails took a small more feat than others, but overall, I felt the polish came off pretty well. For me, I felt this was the perfective balance between being easy to remove and not falling off before I wanted it to come off.
here are my nails after I peeled the polish off. This is the state of my nails as I type this. ( Please ignore the peeling tips, jaundiced stains, and terribly dry cuticles. ) As you can see, there ’ sulfur still a short bit of polish that I will need to use remove the death short bits of polish, but I can deal with that !
Considering that I got a pretty good sized chip in my polish after only two days of wear, I don ’ deoxythymidine monophosphate think you could make it for much more than 2 or 3 days using a peel-off nucleotide coat. If I had plans to wear a glitter polish for a workweek, I would credibly equitable use a even base coat to ensure good wear and good deal with removing it the old fashioned way.
I ’ ve got tantalum go and put something modern on my nails now ! Please let me know if you ’ ve had any experience with a peel-off base or if you are going to give the DIY version a hear. Thanks for read !