1. Taking a hot shower right after applying polish

never shower immediately after a manicure, as you credibly haven ’ metric ton given the polish adequate time to set in. A steaming hot shower is tied worse .
“ Exposing the nail polish to the heat and steam of the lavish can cause it to bubble or smudge, ” says Danielle Candido, manicure expert for Gelish. “ It ’ s best to wait a fully hour after the manicure is done before showering. ”

2. Going to bed right after applying polish

Although nails will appear dry within 20-30 minutes, it actually takes a full 24 hours for nail polish to amply dry .
“ A extremely easy flim-flam to help the dry process along is to wait a minute or two for your polish to start setting up, then run very cold water over your hands for about three minutes, ” says Candido. “ The coldness water helps the polish set up faster. ” however, she warns, “ Be careful to not to run the water directly on the nails as the force of the water may cause the polish to smudge. ”

3. Skipping topcoat

“ Skipping a greatcoat not alone cuts down on the glazed end of the manicure but it besides shortens the longevity of the manicure, ” Candido says. She besides recommends applying an extra layer of greatcoat every other sidereal day for an even longer life .

4. Skipping base coat

Who hasn ’ t thought they could get away with skipping the base coat once or doubly ? You live and you learn : Candido explains that basal coat smoothes the surface of the nail for a flawless stopping point, improves adhesion of the polish to the nail home plate, and prevents the pigments in the nail polish from staining the natural nail, which means avoiding the yellow breeze through struggle altogether. It ’ s an extra mistreat, but wholly worth it—for more reasons than one .

5. Applying thick coats of color

To compensate for the color looking lighter and sheerer on nails than in the bottle, we tend to paint on thick coats of color. In this case, though, solitaire truly is key .
“ When we apply coloring material in thick layers, the polish takes a lot longer to dry, and the longer it takes to dry, the more probable we are to smudge the manicure, ” Candido says. alternatively, apply flimsy, even coats and wait two minutes in between. The polish will actually dry faster. besides, Candido adds, “ If you apply a heavy coat of polish, it ’ south much more likely to flow into the epidermis area which means you ’ ll have to clean up the mess with an orangewood stick and remover. ”

6. Using one stroke to apply polish

If there is one proficiency you should take with you from the salon, it ’ south that manicurists use three to four strokes to apply polish to the nail. With one unmarried stroke, it ’ second difficult to get the sidewalls ( left and right border of the nail ) and cuticle area, making the nail down look unfinished. Plus, the color will grow out in bare days .
“ Apply color to the breeze through in three or four strokes, ” Candido advises. Her approach ? “ Start in the center near the cuticle, swipe down the nail down to the proper slope, return to the starting decimal point and swipe down the smash to the left, then return to the center and swipe down the middle. If there is any exposed area, swipe down the whole collar one more meter. ”

7. Starting with greasy nails

“ If there ’ s oil on the surface of the pinpoint before the polish is applied, it ’ mho much easier for polish to peel—nothing sticks to an oily surface, ” Candido says. rather, wait to apply cuticle vegetable oil after the polish, and go easy with the lotion. “ It ’ s best to use a product like Gelish pH Prep to ensure all coat petroleum and moisture are eliminated before applying your basecoat. ”

This kind of product works by neutralizing the ph horizontal surface in the nail down to better accept the base coat. Basically, it ’ s like a flat coat for your nails .

8. Using old nail polish

There ’ s nothing more press down than saying adieu to a front-runner pinpoint polish that ’ s looking a little worse for the wear, but it ’ randomness got tantalum be done .
“ As polish ages, the solvents evaporate, causing it to thicken and get stringy. This makes applying polish quite unmanageable, ” Candido explains. “ Old polish [ besides ] doesn ’ thyroxine stand by to the smash arsenic well as fresh polish does. As a rule of ovolo, go through your polishes every year and replace anything you didn ’ thymine buy in the last 12 months. ”

9. Avoiding the whole cuticle area

If you ’ re not ace diligent about keeping your cuticles in check, your manicure will look messy .
“ You merely need to leave a hair ’ width between the polish and the cuticle, ” says Candido. “ To get american samoa close as possible without touching the cuticle, plant the brush on the breeze through plate near the cuticle and apply alight press to spread the brush out. then, lift slenderly and push towards the epidermis, stopping at the cuticle without touching it. then, swipe down the nail turning the brush slenderly in your fingers to the left or the right to get along the sidewall ( left or right border of the nail plate ). ”

10. Using acetone remover

Nail polish removers high in acetone dehydrate the smash and surrounding cuticle. “ repetitive habit can cause white spots on the smash adenine well as cleave at the free edge and dry of the epidermis, ” Candido warns. “ Non-acetone remover is a much kind and easy choice. ”
Ahead, three more products to complete your at-home mani place .

Deborah Lippmann Rich Girl Hand Cream SPF 25

Dr. Jart+ Dermask Hand Hydrating Mask

HUM Nutrition Killer Nails Supplement

Our mission at STYLECASTER is to bring style to the people, and we only feature products we think you’ll love as much as we do. Please note that if you purchase something by clicking on a link within this story, we may receive a small commission of the sale and the retailer may receive certain auditable data for accounting purposes.