OPI Gelcolor soak off gelatin polish ( released on October of 2011 ) applies good like traditional collar polish, but gives your like a extremely glazed eat up that lasts up to two weeks. You can precisely just apply the mousse like regular nail polish and cure it under a UV or LED lamp for the specify period of time .
Why choose OPI Gelcolor?
OPI Gelcolor is produced by the largest manufactur of nail products in the populace. OPI ‘s Gelcolor will last for 2 weeks and is made specifically to fight the normal wear and tear from day by day activities. Their convention does not damage the natural nails and will help keep your nails firm and goodly .
How long does it take for OPI Gelcolor to cure?
The hardening times for Gelcolor mousse polish is highly subject on the type of lamp that you are using. For LED Lamps, Gelcolor will take 20-30 seconds to cure. however, with a UV Lamp, it will take 2 – 3 minutes to cure. Check out the latest run lamp for faster curing !
How do I use OPI Gelcolor polish?
The Gelcolor application process is very similar to the other soak off mousse polishes … This is how you do it :
Step 1. Prepare the pinpoint by using an orangewood stick to push the cuticles back for a houseclean application of gel
Step 2. Shape your nails to your manner with a natural nail filer ( 150 grit or higher )
Step 3. Prepare the natural nail by gently removing the glitter using a buff … lightly buff it to rough up the pinpoint beds
Step 4. Remove the oils and dust on your nail by using nail cleansing agent
OPI Gelcolor Application
Step 5. ( Roll the gelcolor bottle in your hands to mix the contents ) Apply a slender even layer of Gelcolor Base Coat onto your nail .
Step 6. Place your hand in an LED Lamp and cure for 10 seconds or UV Lamp and cure for 1 infinitesimal. The top coat will remain tacky/sticky, but this is convention of any soak off gel polish .
Step 7. ( Roll the Gelcolor bottle in your hands to mix the contents ) Apply a thin even layer of Gelcolor Color coat to your nail. Do n’t forget to cap the nail edges to create a seal. Make surely you remove any Gelcolor from the skin prior to curing .
Step 8. Place your hand in an LED Lamp and cure for 20 seconds or UV Lamp and bring around for 2 minute .
Step 9. Apply a second coat of Gelcolor tinge to the collar .
Step 10. Place your hand in an LED Lamp and bring around for 20 seconds or UV Lamp and cure for 2 moment.
Step 11. Apply a thin even level of Gelcolor Top Coat onto your nail. The top coat creates a high shine while protecting the gelatin layers below it from damage. Do n’t froget to cap the complete edges to create a varnish .
Step 12. Place your hand in an LED Lamp and remedy for 20 seconds or UV Lamp and cure for 2 minute .
Step 13. Use a liberal measure of alcohol ( 99 % ) or gel cleansing agent with a lint complimentary pad to remove the tacky/sticky remainder from your nail .